I'm using ripjaws (F4-2400c15q-16GRK) and I'm wondering what typical voltages would be like for System Agent to stabilize this kit. It would appear that an offset of 0.250 yielding voltages of 1.150 ~ 1.160 seems to work. Anything lower seems to trigger a bluescreen (usually code 124).
Is this higher than usual? What has been the experience of others using such memory?
Bonus question: I recently got a bluescreen of code 0x9f when attempting to overclock my memory. To test, I left the memory at stock and overclocked the CPU yet didn't trigger this error. The system ran fine a for a number of days and passed many hours of stress testing. This particular code seems to indicate a power-state issue. I overclocked the memory again and attempted to sleep the machine. No errors. I'd likely suspect a offset voltage setting to be the issue but can't seem to pin point the genesis of this error.
Is this higher than usual? What has been the experience of others using such memory?
Bonus question: I recently got a bluescreen of code 0x9f when attempting to overclock my memory. To test, I left the memory at stock and overclocked the CPU yet didn't trigger this error. The system ran fine a for a number of days and passed many hours of stress testing. This particular code seems to indicate a power-state issue. I overclocked the memory again and attempted to sleep the machine. No errors. I'd likely suspect a offset voltage setting to be the issue but can't seem to pin point the genesis of this error.
Comment