Hello,
a few weeks ago i brought this Kit: F3-12800CL9T2-24GBRL.
Till today and after testing much, my system is not 100% stable.
I tested with LinX over 2 hours - > no errors!
I testet with Memtest 5 hours -> no errors!
It seems that i have only problems with BSOD's reference_by_pointer in BF3.
Bios Settings:
QPI 1,28 V
Ram 1,55 V
This system was stable till i put this kit in.
I don't know what i should do next. I'm working in a single stick-test, but this will take
much time.
What else can i do to find the error causer?
The system is new installed all drivers are up to date.
Thanks in advanced!
Greetting from Germany,
Error1
a few weeks ago i brought this Kit: F3-12800CL9T2-24GBRL.
Till today and after testing much, my system is not 100% stable.
I tested with LinX over 2 hours - > no errors!
I testet with Memtest 5 hours -> no errors!
It seems that i have only problems with BSOD's reference_by_pointer in BF3.
Bios Settings:
QPI 1,28 V
Ram 1,55 V
This system was stable till i put this kit in.
I don't know what i should do next. I'm working in a single stick-test, but this will take
much time.
What else can i do to find the error causer?
The system is new installed all drivers are up to date.
Thanks in advanced!
Greetting from Germany,
Error1
Comment