Hello Support
Planning a new build with the ASROCK Z68 Extreme7 Gen3 mobo and using the matched/tested 4GB X 4 set = 16GB of GSkill RipjawsX F3-17000CL11Q-16GBXL
DDR3-2133 (11-11-11-30-2N) that has the XMP profile.
1. Will this memory work with the board as it's not on ASROCK's memory support list ?
2. If this memory will work on the board besides enabling the XMP profile in the BIOS (not sure where that feature is at the moment) will I need to
change any voltages or other settings and/or manually set timings in the BIOS in order to keep the stable at 2133 ?
3. Is it recommended to use just 2 dimms (8GB) in the correct 2 mobo slots on a new install then add the other 2 dimms in the remaining 2 slots
(to make 16GB) later on after the memory has proven to be reliable and stable ?
Any guidance and tips would be greatly appreciated
Thanks
SaphireX
Planning a new build with the ASROCK Z68 Extreme7 Gen3 mobo and using the matched/tested 4GB X 4 set = 16GB of GSkill RipjawsX F3-17000CL11Q-16GBXL
DDR3-2133 (11-11-11-30-2N) that has the XMP profile.
1. Will this memory work with the board as it's not on ASROCK's memory support list ?
2. If this memory will work on the board besides enabling the XMP profile in the BIOS (not sure where that feature is at the moment) will I need to
change any voltages or other settings and/or manually set timings in the BIOS in order to keep the stable at 2133 ?
3. Is it recommended to use just 2 dimms (8GB) in the correct 2 mobo slots on a new install then add the other 2 dimms in the remaining 2 slots
(to make 16GB) later on after the memory has proven to be reliable and stable ?
Any guidance and tips would be greatly appreciated
Thanks
SaphireX
Comment