Hello, I have a F3-12800CL7D gskill-4GBXM a Extreme4 asrock motherboard. But it turns out a BSOD screen. and restarts constantly tried the xmp profile and do not turn on. The only way you turn is putting latencies 9-8-9-28-2N. Because if the originals are 7-8-7-24-1n?
Announcement
Collapse
No announcement yet.
F3-12800CL7D gskill-4GBXM a Extreme4 asrock motherboard
Collapse
X
-
It's 7-8-7-24 2N and check the DRAM voltage, this is a 1.65 voltage set and the mobo may want to default to lower. Also, do you have the latest BIOS, an older BIOS may not support the high performance sticks
-
My fault, looked at the wrong specs, at 1.5 the stock timings and CR at 2N should be fine. With the restarts and the BSOD may want to reinsert the sticks after ensuring the contacts are clean and the slots have no dust or anything in them (can blow out w/ compressed air) then ensure the sticks are firmly seated.
Comment
Comment