Gskill F3-12800CL7T-6GBPI

[moredread]

Hello

I just bought these stuff..and builted it!
Sabertooth X58+ I7 950 + Gskill F3-12800CL7T-6GBPI



I try XMP profile.. and doesn't but (gives overclock failure)
I try manually with QPI 1.35 Dram 1.5
and boots only at 7-8-7-24-60-2N!
i can't get trFC 36 only 60 !! (all other settings are auto-default , no oc at all)
having fsb:dram 2:12

what should i do?

a new problem!! the Task manager see only 2Gb ram (from 6gb)



CpuZ and bios see normal 6G BUT Everest +Windows only 2 !!
what happens here?

[Tradesman]

The sticks should fine fine in your mobo, may want to try reseating all the sticks, if the problem persist try running Memtest on each stick individually to see if you may have a bad stick

[moredread]

can you please send me what's the tRFC number for these memories?

i reseated them...and after a cmos clear...it worked with the XMP fine...
but it puts 1.4 QPI ...that's a LOT!

[Tradesman]

Depending on the config of your overall system, auto should set the tRFC pretty well, prob between 60-70, but could be a bit higher. You can try lowering QPI, say .01 at a time while maintaining stability, but with 1600 sticks it will require higher than base the base QPI, again it will depend on the overall config

[moredread]

tfrc gives me at 88 (on auto) if i put lower than 60... gives oc error

i metest them and no error...
probably is matter of voltage!

thx

[Tradesman]

No problem, tRFC is a stabilization setting that can vary quite a bit, as long as system is stable, not to worry