If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Yes, I know, that is just a test to make sure the two kits can be compatible in the same computer.
If you followed the guide, you should have no problems. Please create a thread and post pictures of BIOS so we can see if you have anything set incorrectly.
Hey, im using ASrock's turbo UCC to auto overclock my PC BUT i effs up my Memory.
I Bought a G.SKILL Ripjaws Series 4GB (2 x 2GB) DDR3 1600 (Model# F3-12800CL9D-4GBRL) and it come up in the Bios as a DDR3 1146 @573Mhz @1.547v.
i cant find DDR3 1333 and 1.50v options in the Bios as well.
Hi, I have read the whole post i cannot find the solution to my unstable system. The picture shows my current (and most stable) config. what is wrong? i am not sure what to do with the voltages.. should i leve them as "offset"? the timings are CL9... please help! thanks
Last edited by estebanworld; 06-30-2011, 03:32 PM.
Reason: resized images :)
----------------------------------------------
Phenom II x6 1090T Black Ed.
Asus M4A89GTD PRO/USB3
8GB (2x4GB) G.Skill F3-12800CL9D-8GBRL DD3 1600 PC3
Windows 7 64 bit
Hi there, thnaks for your reply. I aplied those changes, and although it is better, it still freezes .
The CPU ratio shows like [15.0] I hope that is the what you meant with [15X].
I left the Cpu Voltage on [Auto] and it shows 1.344 in grey..
Please let me know what else i can do... thanks GSKILL TECH!
----------------------------------------------
Phenom II x6 1090T Black Ed.
Asus M4A89GTD PRO/USB3
8GB (2x4GB) G.Skill F3-12800CL9D-8GBRL DD3 1600 PC3
Windows 7 64 bit
i was messing around with the bios and i finally got DDR3 1600 but i have to cancel Turbo UCC and keeping my CPU @ stock (3.4) But my mobo has the Asrock EZOverclock which lets me overclock both CPU and Memory by percentage (5%, 10% etc.) and after putting it to 5% it overclocked my Cpu to 3.57 AND it also overclocked my G.Skill memory to DDR3 1680@840MHz@1.547v. my question is, is DDR3 1680 @ 840MHz is stable enough for my G.skill memory????
I have a G.SKILL Ripjaws Series 4GB (2 x 2GB) DDR3 1600 (Model# F3-12800CL9D-4GBRL)
Comment