If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
NB Frequency 2400MHz, CPU-NB Voltage 1.20V, that should give you max performance.
GSKILL TECH
I dont see NB freq in my manual, here's a few settings is it one of these? Not sure about CPU MB either. Here's a few examples and a few options.
processor freq multiplier x9.5 1900mhz x12.0 2400mhz x15.0 3000mhz
HT over voltage 1.25 to 1.385
HT link freq 600 mhz 1000 mhz 2200 mhz
mem clock mode 400 533 667 800 mhz
mem overvoltage 1.5 to 2.050
chipset over voltage
CPU/NB voltage( which one do I use?)
I changed the CPU/NB manual voltage last time to 1.25V (+10 OVER STOCK)
Ram timings
Maybe I'm missing something on the CPU/NB voltage?
Dram voltage was at 1.50 stock.
If I just use 2 of the sticks (2x4) everything is perfect. Prime gives no errors on blend, and It shows the memory running at 1600Mhz. I have swapped from dimm slot to dimm slot , same.
It's when I put all 4, 4 gig sticks in where it doesn't work. I have tested all of the sticks and 2 at a time they work perfect at 1600Mhz.
i did everything in method 1 except setting my dram to 1.5v because it seems lik its already in 1.5v in auto. i just left it in auto cuz if i set it to manual the bios warn me of my system not in optimal form. and it seems lik auto already have my dram at 1.51v
buttttt.....when i use cpu-z to look at my memory it says this:
dram freq - 800mhz
fsb:dram - 3:10
CL - 9
tRCD - 9
tRP - 9
tRAS - 24
tRC - 39
CR - 2T
now my question is shouldnt my dram freq be 1600mhz? or am i missing something? is that normal?
It is showing the actual frequency of the RAM, 800, since it is Double Data Rate (DDR) you take the frequency times 2, 800 x 2 = 1600. You are right on the proper specification.
Did you test one at a time to see if one may be bad causing problems?
Thank you
GSKILL TECH
No.
I tested 2 at a time. Works fine. I swapped the sticks to different dimm slots. Still works fine. It's only when I try to run all 4 , 4 gig sticks that I have the problem.
Comment