Originally posted by greg_p17@hotmail.com
View Post
Announcement
Collapse
No announcement yet.
AMD CPU + G.Skill DDR3-1600
Collapse
This is a sticky topic.
X
X
-
Originally posted by dreamphysix View PostDo you think similar settings would work on my 965 Black Edition?
I don't know what mobo you have, and I am not a tech expert so I make no suggestions for you.
Comment
-
greg_p17@hotmail.com
1600 alone can be a chore, with 16GB even more so (all slots filled, more stress on the MC (Memory Controller) and mixing 2 sets is even more of a problem, may be better off at 1333 and tighten down the timings to 8-8-8-24 and see how that works (if it does, quite often, especially with AMD and all four slots mixed sets just don't want to work, it's also possible the two sets simply dont want to play together, which is why they sell 16GB sets where the sticks are all tested to work together.
dreamphysix
Same basic thing is applicable to you if using two sets, the AMD MCs are weak, even the latest greatest Dozers often have problems with more than 1 stick per channel at their rated speed, which is 1866 (but this is something they have done for years, the early CPUs that could actually run 1066 were limited to 1 stick per channel, had same thing with some CPUs and 1333, the early 965s could do 1600 w/ but 2 sticks (well a few of them could, not many), even the C3 version of the 965 often has trouble w/ 4 sticks (especially if it's 16 GB total, tthey generally can handle 4x2GB)....they really need to invest more in R&D on the MCs but then the prices would shoot up, and the latest/greatest FX-8150 already cost more than an Intel i2500K, but the 2500K run circles around it.
Comment
-
FSB needs to be 233. (233 x 8 = ~DDR3-1864)
NB Frequency - ~2796MHz
What memory do you have? I don't know what timings you can try if I don't know what memory you have.
Thank you
GSKILL TECH
Originally posted by uqwe View PostHey, after setting the NB Freq. to 2400 MHz the System freezes while booting into Windows.
Now i figured out some more Configs.
The best till now is:
CPU Freq: Auto
NB Freq: Auto
FSB: Auto (200)
Memory Clock: 1600 MHz (800 MHz)
DRAM Voltage: 1.60
NB Voltag 1.10 V like on Automatik
and the Timings i changed to 7-8-7-24
With this setup, system is stable running.
But i would like to run the memory with 1866 MHz (937 MHz).
Greetz from Germany
Comment
-
greg_p17@hotmail.com and dreamphysix
You don't need high voltages, so no need to try.
Post pictures of your best settings and I can check to see what's incorrect. Or, post your advanced timings so I can make sure those are not too tight causing instability.
Do you guys have the latest BIOS?
Thank you
GSKILL TECH
Comment
-
Hey I'd just like to post some info for OCing my ram f3-12800cl9d-4gbrl Can someone just look over my values cause I've never OC'd before and would like to juice my speed up to DDR1600 like it should rather then 1333. I just manually set my DRAM freq. to 800 and set the timings to tcl9 trcd 9 trp 9 tras 24
I didn?t change anything else off auto except for mem over-voltage up to 1.51 a touch and my system is stable.
NB freq = 2000
FSB :dram = 1:4
dram 800
4x2gigs=8gigs
Thnx
Comment
-
Originally posted by Tradesman View PostAs long as stable, that's the big thing, if more help needed pls include mobo and CPU (also never hurts to have current BIOS rev)
Phenom II x4 955 BE
asus m4a785t-m mobo bios 0606 9/10/09
Comment
-
Do I HAVE to overclock? I am a complete noob and this is my first time building my computer. I don't want to mess anything up. Anyways my current computer is:
mobo: gigabyte 970a-ud3
cpu: phenom II x4 955 BE
ram: G.SKILL Ripjaws Series 8GB F3-12800CL9D-8GBRL
gpu: radeon 6870
What should my settings be? Do I have to change it in the settings when I first boot up my comp or can I just let everything stay @ auto? If I overclock my cpu using the first method without increasing the volt, will it lower my cpu's performance?Last edited by joobie; 11-29-2011, 10:06 PM.
Comment
-
Even with the settings on the 1st page, I can't get it stable at 1600.
I get errors within a few seconds in Prime95.
If I down clock to 1333 everything works fine, no prime 95 errors.
Any idea how to get it to 1600 and stable?
Specs:
Win 7 64bit
CPU: AMD AM3+ 1090T BE 3.2ghz @3600
Mobo: Asus Sabertooth 990FX
Vid card: Asus ENGTX460 direct cu
Power supply: OCZ Gamers Extreme 700w
Hdd: Seagate 250g, Samsung 1T
Case: Antec 900 Gamer
Memory: Gskill , 16 gig of Ripjaws 12800Last edited by Force0321; 12-05-2011, 10:18 AM.
Comment
-
grampabob,
NB Frequency 2400MHz, CPU-NB Voltage 1.20V, that should give you max performance.
joobie,
Try method #2. You don't have to overclock CPU frequency, but you need to lower CPU Ratio and make sure other frequencies are correct. Other frequencies such as NB Frequency should be overclocked for DDR3-1600, otherwise, you may as well operate it at DDR3-1333 with lower timings.
Force0321,
NB Frequency 2400MHz? CPU-NB Voltage 1.20V?
Make sure to manually input DRAM frequency, timings, and voltage.
Thank you
GSKILL TECH
Comment
Comment