If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Seems like 1.35V of QPI/Vtt didn't help either... Still 4gb this morning.
If I RMA the RAM, would I need to RMA all the 3 dimms?
How could I find out the one that is not functioning "correctly"?
Could run Memtest on each stick individually to see if any show a problem - could also try raising the DRAM Bus voltage a tad and see it that helps 'see' them, if so, can then possibly drop the QPI/VTT a bit.
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Okay so I just put my system back up (re-assembled it) because there was absolutely no bent pins, and in the meantime I read threads about the same problem with the same model of RAM (NQ)...
Something is happening with this model, a LOT of people do not get all of their ram on the first boot.
To tradesman: There is surely a computer shop near here, but they'll want at least 25 bucks to start with =(
I'd disable both of those, thought we'd already touched on that...to many similar posts on this issue....I'll read through the entire thread again and see if anything else pops up, may be morning though
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Those supposedly help regulate power usage to keep it down, but going back a few years to tuning systems for for gamers, I've almost always disabled them on desktops.
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
That might help others also with similar problems, glad you mentioned it. For me, it's sort of an automatic thing when I build a system, so it's something I don't always think of when trying to help out here. Here it's more going on memory of systems since I seldom have the components to actually play with, unless it's a match for one of my systems.
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Comment