Hey guyz i have AMD phenom ii x4 955be and asus M4A88T-M/usb3 mobo (mobo Chipset 880G) I wanted to ask whether my config supports G.SKILL Ripjaws Series 4GB (2 x 2GB) 1600Mhz Model F3-12800CL9D-4GBRL...plzz reply asap ???
Announcement
Collapse
No announcement yet.
Asus M4A88T-M/usb3+ F3-12800CL9D-4GBRL
Collapse
X
-
Originally posted by GSKILL TECH View PostNo problem, but for DDR3-1600, you need to set memory frequency, timings, and voltage in BIOS. Also, CPU-NB Voltage must be increased by +0.1V to stabilize DDR3-1600.
Once you make these changes, everything should be stable.
Thank you
GSKILL TECH
I am building my own rig and have the same mother board setup and ram setup as stated above.
Comment
-
This is the reason for standardization, and the reason ANY memory will POST at DDR3-1333 CL9 max. Even though a memory kit may require settings (above the standard), the system will still POST because of the JEDEC standard, then once you make the proper changes in BIOS, the computer will restart then operate as you configured.
Thank you
GSKILL TECH
Originally posted by pakman View PostIs it possible to boot into the bios with this ram? (without changing the settings you stated)?
I am building my own rig and have the same mother board setup and ram setup as stated above.
Comment
-
Thank you for responding!
now when it comes to changing, what settings do i change exactly?
you stated above "CPU-NB Voltage must be increased by +0.1V to stabilize DDR3-1600."
Where is this info stated so i can read it all?
i presume its in the packaging the ram comes with.
Comment
-
The info is right here. I'm telling you based on experience that your hardware combination needs such as voltage boost. It is not included in the package because it does not apply to everybody.
In the BIOS, look for CPU-NB Voltage and raise this to 1.20V. This will stabilize the CPU for DDR3-1600 since it is only capable of DDR3-1333 natively.
Thank you
GSKILL TECH
Comment
-
Comment