Hi everyone,
ich have buyed a new Computer here are the Speccs :
beQuiet SilentPower E5-450 Watt
Sapphire Radeon HD5770
Athlon II X3 445
GA-880GMA-UD2H Rev2.0
2x 2GB G.Skill F3-12800CL9D-4GBNQ (on the verified by gigabyte list)
WD Caviar Blue 500 GB HD
RAM timings by SPD nothing overclocked
I have the following Problem, i installed Win7 on the new maschine everything was fine. I used it the whole day (for games ...) The next day i started it and after startup i got some Errors from Applications not running properly, then i got some Bluescreens (Memory Management). After that i booted with linux boot cd and testet the Memory with Memtest86+ for 3 hours with 0 Errors. I than reinstalled Win 7. It ran fine for a day then the next day after startup the same problems occured. I then removed RAM2, then the system rans fine even after a cold boot. Then i updated BIOS to latest Version put in RAM2 then i got the Bluescreens again. I then switched RAM2 from socket 2 to 3, it runs in single channel mode there. System was fine until the next cold boot, i got the same Bluescreen again. Any ideas ? Should i RMA the Memory ?
Thanks for the help
ich have buyed a new Computer here are the Speccs :
beQuiet SilentPower E5-450 Watt
Sapphire Radeon HD5770
Athlon II X3 445
GA-880GMA-UD2H Rev2.0
2x 2GB G.Skill F3-12800CL9D-4GBNQ (on the verified by gigabyte list)
WD Caviar Blue 500 GB HD
RAM timings by SPD nothing overclocked
I have the following Problem, i installed Win7 on the new maschine everything was fine. I used it the whole day (for games ...) The next day i started it and after startup i got some Errors from Applications not running properly, then i got some Bluescreens (Memory Management). After that i booted with linux boot cd and testet the Memory with Memtest86+ for 3 hours with 0 Errors. I than reinstalled Win 7. It ran fine for a day then the next day after startup the same problems occured. I then removed RAM2, then the system rans fine even after a cold boot. Then i updated BIOS to latest Version put in RAM2 then i got the Bluescreens again. I then switched RAM2 from socket 2 to 3, it runs in single channel mode there. System was fine until the next cold boot, i got the same Bluescreen again. Any ideas ? Should i RMA the Memory ?
Thanks for the help
Comment