Gigabyte 880GMA-UD2H

[inkhunter.ca]

I have the following hardware:

Gigabyte 880GMA-UD2H
AMD Phenom II X4 965 - Black Edition
G.Skill F3-10666CL9T-6GBNQ

with the above config I am not able to fully install Win7-x64

BIOS was left on default settings and each chip failed memtest 86 in each of the boards 4 slots. I have since put in a single Kingston KVR1333D3N9/2G and everything is working fine. Obviously the G.Skill memory needs to have the timings and such set manually. can anyone let me know what those settings are?

thank you,

InkHunter.ca

[GSKILL TECH]

This kit should not need manual settings, so send them in for the G.Skill F3-10666CL9D-4GBNQ.

The kit you purchased if for a triple channel motherboard, you need one for dual channel which is 2 or 4 modules.

For this motherboard, the first slot should be 2 and for dual channel it should be 2 and 4.

Thank you
GSKILL TECH

[inkhunter.ca]

where do you want them sent?

[GSKILL TECH]

Contact your original place of purchase for the exchange.

Thank you
GSKILL TECH