F3-12800CL8D-4GBRM & Gigabyte MA770T-UD3P

[FavioFF]

Help me to configure memory, I recorded the frequency of 1600MHz, my equipment is as follows:

RAM: G.Skill F3-12800CL8D-4GBRM
Motherboard: Gigabyte GA-MA770T-UD3P -- F4 (Bios)
CPU: AMD Phenom II x3 720 2.80 GHz. Black Edition


When you start the PC always fail, to remedy this I must restart the computer when you finish loading the BIOS settings, then on without errors.

I have the memories mentioned above, and configured this way:


CPU Clock Ratio (Auto) 2800 MHz
CPU NortBridge Freq. (Auto)
CPU Host Clock Control (Auto)
X CPU Frequency (MHz) 200
X Memory Clock X6.66 1333 Mhz

System Voltage Control (Manual)
DRAM Voltage Control= 1.640V
DDR VTT Voltage Control= 1.000V
NB Voltage Control= 1.120V
SB/HT Voltage Control= 1.400V
NB Pcie Voltage Control= 1.800V
CPU NBVID Control (Normal)
CPU Voltage Control (Normal)
Normal CPU Vcore= 1.3250V


1600 Mhz
DTCs Mode Unganged
DDR3 Timing Items (Manual)------------SPD---------------AUTO
Cas# 8T------------------------------------9T------------------9T
Ras to Cas 8T------------------------------9T------------------9T
RPT 8T--------------------------------------9T------------------9T
Min Ras Active Time 24T-----------------24T-----------------24T
1T/2T Command Timing 2T---------------------------------------
TwTr Comand Delay 6T-------------------5T------------------5T
Trfc for Dimm 1 160ns-----------------110ns---------------110ns
Trfc for Dimm 2 160ns--------------------------------------------
Trfc for Dimm 3 160ns-----------------110ns---------------110ns
Trfc for Dimm 4 1600ns-------------------------------------------
Write Recovery Time 12T----------------10T-----------------10T
Precharge Time 6T-------------------------5T------------------5T
Row Cycle Time 34T----------------------33T-----------------33T
Ras to Ras Delay 5T-----------------------4T-------------------4T
Bank Interleaving Enabled
Channel Interleaving Enabled

Tks.

[GSKILL TECH]

Try increasing CPU NBVID Control +0.1V

Thank you
GSKILL TECH