Tweet
Hi. I am new here and hope that somebody could help me. Sorry for my bad Englisch, hope you unterstand me.
Since last Week i have a second kit of this Ram 10666CL7d-4GBRH. Before this i had no Problems with one Kit installed. After installing the second Kit i get BSOD. So i remove the Kit and the System will be fine.
I tested the Memory in different Configurations. Everything works fine if i dont use all four of it. Then I get BSOD when i startet the PC. After some Restarts the System works fine without Problems.
After reading here about the Coldboot Problems i try some different things.
First i set the 7-7-7-21 in Bios manually -> First Start BSOD. Restart all Ok.
Then i set the Memory Voltage in different Steps up to 1,6V-> First Start BSOD. Restart all Ok
Then i raise the NB Voltage a little Bit -> System unstabel
Now i set the Timing like CPU-Z say to 7-7-7-23 and 1,5V -> First Start BSOD. Restart all Ok
I dont know what i should do now. Anybody some suggestions for me?
Sorry for my Englisch i am from Germany.
Since last Week i have a second kit of this Ram 10666CL7d-4GBRH. Before this i had no Problems with one Kit installed. After installing the second Kit i get BSOD. So i remove the Kit and the System will be fine.
I tested the Memory in different Configurations. Everything works fine if i dont use all four of it. Then I get BSOD when i startet the PC. After some Restarts the System works fine without Problems.
After reading here about the Coldboot Problems i try some different things.
First i set the 7-7-7-21 in Bios manually -> First Start BSOD. Restart all Ok.
Then i set the Memory Voltage in different Steps up to 1,6V-> First Start BSOD. Restart all Ok
Then i raise the NB Voltage a little Bit -> System unstabel
Now i set the Timing like CPU-Z say to 7-7-7-23 and 1,5V -> First Start BSOD. Restart all Ok
I dont know what i should do now. Anybody some suggestions for me?
Sorry for my Englisch i am from Germany.
Comment