Trident 16000CL9

[SSK]

Hi,

i have this kit in 3x1GO, want to find the lower timming and necessary voltage :

on a P6T SE @ i7 920 // 19x185

Vcore : 1.2000
DDR : 1.66
ICH : 1.14
IOH : auto
QPI : 1.225
PLL : 1.84

iam actualy stable at 740Mhz 6-7-6-18-1t, but i need to reach 800Mhz at the same timming,
so do you know the voltage requirement for that frequency DDR at these timming ?

i tried : 800Mhz 6-7-6-18-1t with :

Vcore : 1.2250
DDR : 1.66
ICH : 1.18
IOH : auto
QPI : 1.35 /!\
PLL : 1.88

but that is high QPI for safety ...and not stable...!! BSOD after a few min idle...same with 1.2750v to Vcore so i think its really a ddr problem...

[GSKILL TECH]

Possibly, the memory is rated at DDR3-2000 9-9-9-24, not DDR3-1600 6-7-6-18-1T. Try raising the QPI Voltage to see if that helps. You may need 1.40V or even more

Thank you
GSKILL TECH

[SSK]

Iam actually at 1604 6-7-6-18 1T, 1.66v, QPI @ 1.30 rockstable
good ship ty gskill !

Problem will to reach 1680 (for the 4.0ghz) at these timming without up more 1.35qpi...

[GSKILL TECH]

Great, sounds like you have very good hardware.

Enjoy!

Thank you
GSKILL TECH