Motherboard: Gigabyte GA-880GA-UD3H
Memory: F3-10600CL8D-4GBHK
CPU: AMD Phenom X4 955 BE
I realize this memory is not on the confirmed list of modules tested on my motherboard but I was hoping that there is just some setting that I am missing to get these two modules to work in dual channel.
I have successfully booted with each individual memory module so both are in working order. The motherboard is setup into Channel 0 (slots 1 & 3) and Channel 1 (slots 2 & 4).
I can boot successfully with either channel 0 or channel 1 populated with the two sticks and they show both working obviously in single channel mode.
When I put them into dual channel configuration (slots 1 & 2 or slots 3 & 4) the system will not post. No display, no beeps, no usb keyboard or mouse just system and CPU fans.
I have tried setting the timings to 8-8-8-21 (auto setting results in 9-9-9-24) and the system works fine in single channel mode but will not post in dual channel configuration.
I have also tried downclocking the speed to 1066 with the 8-8-8-21 and auto timings and the system is fine in single channel mode but will not post in dual channel configuration.
Any help is greatly appreciated.
Thanks.
Memory: F3-10600CL8D-4GBHK
CPU: AMD Phenom X4 955 BE
I realize this memory is not on the confirmed list of modules tested on my motherboard but I was hoping that there is just some setting that I am missing to get these two modules to work in dual channel.
I have successfully booted with each individual memory module so both are in working order. The motherboard is setup into Channel 0 (slots 1 & 3) and Channel 1 (slots 2 & 4).
I can boot successfully with either channel 0 or channel 1 populated with the two sticks and they show both working obviously in single channel mode.
When I put them into dual channel configuration (slots 1 & 2 or slots 3 & 4) the system will not post. No display, no beeps, no usb keyboard or mouse just system and CPU fans.
I have tried setting the timings to 8-8-8-21 (auto setting results in 9-9-9-24) and the system works fine in single channel mode but will not post in dual channel configuration.
I have also tried downclocking the speed to 1066 with the 8-8-8-21 and auto timings and the system is fine in single channel mode but will not post in dual channel configuration.
Any help is greatly appreciated.
Thanks.
Comment