problem with ripjaw or no?

[kk1105]

MSI P55-GD80
F3-12800CL9D-4GBRL
i5 750

everything default/auto in BIOS
nothing overclocked

I started get BSOD, IRQ not equal blar blar...
I reinstalled OS(vista 64) and it went away for a while
but it's back again
I thought it was bad stick so I ran memtest and it showed no errors
maybe it's bad HDD, ran seatool and that's no errors as well

I pulled one stick out and i'm running single stick and i have yet to see another BSOD..

what's going on

[GSKILL TECH]

Try the other module by itself and see how it works.

If both work fine, simply configure the memory settings in BIOS.

DRAM Frequency DDR3-1600
DRAM Timings tCL 9 - tRCD 9 - tRP 9 - tRAS 24 - Command Rate 2
DRAM Voltage 1.50V

Thank you
GSKILL TECH

[drudru]

maybe try to keep ur pc off for a night...like 5/6 hours..then run memtest at first boot,try it with both stick and then one by one...see if u get error...

[kk1105]

one of the stick is giving me error in memtest as soon as I start the test, but not when I test both at the same time, not at least for 20min+, couldn't wait till it was finished.
would changing the setting in BIOS help? or bad stick is bad stick no matter what?

[GSKILL TECH]

It is a bad stick if the other one by itself does not error immediately.

Thank you
GSKILL TECH