Ga-770ta-ud3 + f3-12800cl7d-4gbrm

[intox]

Hi Gskill Staff!!

here is my problem...

bios is setted by stock as 1333mhz 1.5V and 9-9-9-24... When I change it to 1600mhz 1.6V and 7-8-7-24 it says something like im overclocking so i have to change bios again... I mean it doesnt start with that config :S

Do you know what is the bios config that gives me the highest stability and speed?

MotherBoard: Gigabyte GA-770TA-UD3
PC: AMD Phenom II X4 3.2Ghz Black Edition Stepping C3
RAM:2x2 Gb Gskill DDR3 RIPJAWS 1600mhz (F3-12800CL7D-4GBRM)

Thanks!

[Tradesman]

It says it is OCing as the mobos default is 1333, so that's not a problem as long as your system is stable

[intox]

well yes I know...but bios doesnt allow me to start the computer when i change it to those parameters it says that i have to cahange bios again... may be i have to change voltage what do you say?

i tried to start it with 1.6V and latencies and it works OK, but set at 1333mhz

Can you tell me whats the best bios config for me?

thanks for fast reply!

[intox]

It says it is OCing as the mobos default is 1333, so that's not a problem as long as your system is stable

Here is the message

"the system has experienced boot failure becouse of overclockng
last setting in bios setuo may not coincide with current HW states
Current CPU speed :16.0 x200mhz
Current Memory speed: 1333mhz
Current Ht speed: 2000mhz

Press Del key to enter BIOS or any other key to continue"

The fact is when I press any other key and start windows... the ram still as 667mhz and 9-9-9-24

[intox]

please guys...

Anyone?


what bios config do i have to set?

thanks

[GSKILL TECH]

You need to use 8-8-8-24 because your BIOS can not handle CL7 at DDR3-1600.

Thank you
GSKILL TECH