F3-12800cl8d-4gbtd foxconn blackops x48

[Starage]

Hello

My system is this

F3-12800CL8D-4GBTD
FOXCONN BLACKOPS X48 bios P05
Intel E8600

My issue is that I can not get stable with this ram at 1600.
I have been able to run 1000-1500 with 1.65 volts.
My timings are set to 8-8-8-21-60 T2

My mb and cpu are water cooled.

I do not know what other info is needed.

Yes to run 1600 on my memory I need to overclock.
My cpu will run 4.4Ghz on my old P45 board 100% stable.
I my system is stable at 500x8.5 4.25Ghz with the ram at 1000mhz or 1333mhz.
But not stable with the memory at 1600mhz.
I have tryed 400x10 4Ghz cpu and 1.6Ghz on the memory but is not stable.
If I run 333-370x10 on the cpu, setting my memory to 1333-1480 my system if 100% stable.

Could it just be this ram is no a good match for this board?

[GSKILL TECH]

According to Starage: "please remove post. I tryed bios 07 and increase voltage on the nb chip. I am now 100% stable at 400fsb with ram at 1600."

This is good information, so we would like to keep it active. Please let me know if you feel otherwise.

Thank you
GSKILL SUPPORT

[Starage]

Thanks. I am starting to really like G.skill's memory.