If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
[ Perfect Storm ] F3-16000CL8T-3GBPS + asus p6t deluxe v2
Simply use the XMP Profile, or enter the settings you listed.
Ai Overclock Tuner - Manual
CPU Ratio Setting - 17
Intel SpeedStep Tech - Disabled
BCLK Frequency - 167
DRAM Frequency - DDR3-2000
UCLK Frequency - 4000MHz
QPI Link Data Rate - AUTO
DRAM Timing Control
CAS Latency - 8
tRCD - 8
tRP - 8
tRAS - 24
Command Rate - 2N
You are better off loading your settings/timings manually - XMP is very generic and applied differently by different DRAM manufacturers, so the voltage applied can sway from to low to to high
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Yes i know xmp profile is not perfect system in voltages I definetely am un unlucky guy cause my new perfect storm have one stick that does not run in guaranteed settings 8 8 8 21 2N when i try set processor in 3200-3400 mhz.....
Comment