F3-12800cl9d-4gbrl & asus m4a77td

[atcjedi]

Need help with BIOS settings for Ripjaws Series (2x2GB) F3-12800CL9D-4GBRL with ASUS M4A77TD and AMD Phenom II x2 545 Callisto 3.0 Ghz. Had everything set to auto and no oc. Made a few changes but still getting blue screen after routine operations, sometimes right away and other times after 20 or 30 minutes.

[G.SKILL]

please try to set NB and HT voltage to 1.4-1.5v
then it should run fine
thanks


G.S

[atcjedi]

NB at 1.4v is in the red and indicates that high setting might damage component
HT only goes up to 1.385v

What should I do?

[GSKILL TECH]

Test it at that voltage to see if it will be stable. Although it states high voltage, it is fine to operate 1.40V.

Thank you
GSKILL SUPPORT

[atcjedi]

Was stable for a day, got a blue screen today running Firefox. Is there a web page that I could see recommended BIOS settings? Or any guide that I could read?

[atcjedi]

Any help with recommended setting would be appreciated.

[G.SKILL]

sorry we don't have the same board to show BIOS, so we took M4A79T DELUXE for reference
here they are:









G.S

[atcjedi]

Thank you for the response. I was able to make the suggested changes except for 2 that I could only get close: DRAM Voltage to 1.65 and HT Voltage would only go up to 1.385. I will give this a try and see if I stop getting error messages.

[atcjedi]

Wow that was short lived, just got an error message. Is there any way I can swap out this memory for one that is more capatable with my motherboard? Please advise.

[atcjedi]

I tried the settings from this post http://gskill.us/forum/showthread.php?t=2924 and my system ran for 2 days error free. Hopefully I am getting close to the correct settings.
I ran everything in auto except HT 1.3 and Mem voltage at 1.6. Any suggestions?

[atcjedi]

Please let me know what memory would work with this motherboard. Looking for 4GB of memory in 2 GB sticks.

[GSKILL TECH]

You should have no issues with this memory package. Post up screen shots of your BIOS so we can see what you may have set incorrectly.

Thank you
GSKILL SUPPORT

[atcjedi]

These settings were recommended and my system is unstable. I get blue screens and memory error messages.

http://i542.photobucket.com/albums/g...jedi/BIOS1.jpg

http://i542.photobucket.com/albums/g...jedi/BIOS2.jpg

http://i542.photobucket.com/albums/g...jedi/BIOS3.jpg

[atcjedi]

I was reading in a thread about power supply might be an issue. I do have an old 450 Watt power supply, could that be causing my problems?

[atcjedi]

Please look at my BIOS setting and advise on proper settings! My only other choice is to return them!