If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
BSOD problem on GA-MA 770t-UD3P & F3-10666CL8D RAM
I have the same issue, with a GA-MA770t-UD3P Rev. 1.0 & F3-10666CL8D-4GBRM. After a lot of testing I believe the motherboard is faulty. I was able to reproduce the same errors by running memtest. And I saw that something was adding 8 to the 3rd number in each address, making the bit error 00800000.
I doubt the RAM could do this on its own (perhaps G.Skill techs would like to clarify?)
It's not the CPU as I swapped in another CPU and I still had the same problems.
It's not the BIOS either - I have another setup with no problems, and are exactly the same with the exception of the PSU and Optical drive (IDE vs. SATA) and even when the BIOs was reflashed with the same, matching BIOs, the problem still came up.
I have the same issue, with a GA-MA770t-UD3P Rev. 1.0 & F3-10666CL8D-4GBRM. After a lot of testing I believe the motherboard is faulty. I was able to reproduce the same errors by running memtest. And I saw that something was adding 8 to the 3rd number in each address, making the bit error 00800000.
I doubt the RAM could do this on its own (perhaps G.Skill techs would like to clarify?)
It's not the CPU as I swapped in another CPU and I still had the same problems.
It's not the BIOS either - I have another setup with no problems, and are exactly the same with the exception of the PSU and Optical drive (IDE vs. SATA) and even when the BIOs was reflashed with the same, matching BIOs, the problem still came up.
Actually it was the RAM...I got newegg to send a replacement memory and everything is working like a charm. Now even if i turn on my computer after like 10hrs of shutdown it starts up and runs like a charm!
No problems what so ever. It was just a faulty memory stick thats all.
Comment