So can anyone explain why I can't run in Dual Channel but single works fine????
Announcement
Collapse
No announcement yet.
Asus Maximus III Formula - Please Help with Ram
Collapse
X
-
Originally posted by GSKILL View Postyou may have a i5 750 with weak memory controller, so there is problem while running dual channel
G.SLast edited by Invisible Hand; 12-01-2009, 09:19 AM.
Comment
-
Try the following settings, let me know how it goes.
AI Overclock Tuner - Manual
CPU Ratio Setting - 17.0
BCLK Frequency - 160
DRAM Frequency - DDR3-1600MHz
CPU Voltage - 1.10V
IMC Voltage - 1.20V
DRAM Voltage - 1.65V
CPU PLL Voltage - 1.90V
DRAM Timing Control (submenu)
CAS Latency - 7
RAS to CAS Delay - 7
RAS PRE Time - 7
RAS ACT Time - 24
DRAM Timing Mode - 2N
All others can be AUTO
The memory should be installed in the same color slots.
Thank you
GSKILL SUPPORT
Comment
-
Originally posted by GSKILL TECH View PostTry the following settings, let me know how it goes.
AI Overclock Tuner - Manual
CPU Ratio Setting - 17.0
BCLK Frequency - 160
DRAM Frequency - DDR3-1600MHz
CPU Voltage - 1.10V
IMC Voltage - 1.20V
DRAM Voltage - 1.65V
CPU PLL Voltage - 1.90V
DRAM Timing Control (submenu)
CAS Latency - 7
RAS to CAS Delay - 7
RAS PRE Time - 7
RAS ACT Time - 24
DRAM Timing Mode - 2N
All others can be AUTO
The memory should be installed in the same color slots.
Thank you
GSKILL SUPPORT
Should I RMA these sticks?
Comment
-
Originally posted by Invisible Hand View PostIs this fixable? I've never heard of such a thing. Do you have any links to share? Should I RMA the processor or is this even possible?
generally, this issue will not be found easily, since users thought it's memory issue first
We can't guarantee it's memory controller issue, but it's possible
we also have to double test to make sure the problem
thanks
G.S
Comment
-
Originally posted by GSKILL View Postit is not fixable, but Intel official spec is only upto DDR3 1333, so it may not be acceptable for Intel
generally, this issue will not be found easily, since users thought it's memory issue first
We can't guarantee it's memory controller issue, but it's possible
we also have to double test to make sure the problem
thanks
G.S
Comment
-
Originally posted by GSKILL View Postwe'll replace with a new replacement
for CPU part, you could consider after you received the replacement
thanks
G.S
Do you think that that I'll be able to use (8GB) with no problems once the defective Ram comes back from RMA?
Comment
-
Originally posted by GSKILL TECH View PostYep, you should have no issues operating 8GB with your hardware.
Thank you
GSKILL SUPPORT
Comment
-
Not sure if the G.Skill Tech guys are working this week but if you could respond when you get a chance I'd appreciate it.
I've done a lot more testing over the last few days and have found that one of the new sticks is good at 7-7-7-24-2N @ 1.65v and BLCK at 160. However, one of my first sticks will run with these setting too, but only in the second Dimm slot. Why is that?
If I try to run both sticks in dual channel Memtest still fails in seconds. Please help me understand if this is the ram, the mobo or the CPU's memory controller. I want to get this fixed. Thx
Comment
Comment