If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
F3-10666cl8d-4gbhk + asus m4a78t-e 790gx mainboard
F3-10666cl8d-4gbhk + asus m4a78t-e 790gx mainboard
Hello. I was wondering what memory and mainboard settings I should use for this system? I've read different numbers elsewhere but thought I should ask the memory manufacturers myself.
Hello, I had the same question with the person above but my bios is M4A78T-E BIOS 2503
and my cpu is X3 720BE I changed all the settings as you have instructed but for the timings, i can't seem to change them manually they are set as auto, also the NB voltage's minimun is 1.3V what should i do?
Should be a setting to allow manual settings..might check your manual...also are you running your X3 on the 3 cores or have you unlocked the 4th? Could you post your BIOS settings?
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
I couldn't get the cores to run at 4 cores since it got unstable using unleash mode. Also I am in manual settings but I can't edit the timings for each value. My settings are
AI Overclock Tuner - Manual
DRAM Frequency - 1333
DRAM Controller Configuration (submenu)
DCT Unganged Mode - Enabled
Power Down Enable - Disabled
Rest AUTO
DRAM Voltage - 1.6V
NB Voltage - 1.4V
this is the part I can't seem to edit
---------------------------------------------------
DRAM Timing/Driving Config. (submenu)
tCL - 8
tRCD - 8
tRP - 8
tRAS - 21
-----------------------------------------------
Comment