Announcement

Collapse
No announcement yet.

F3-10666cl8d-4gbhk + asus m4a78t-e 790gx mainboard

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-10666cl8d-4gbhk + asus m4a78t-e 790gx mainboard

    Hello. I was wondering what memory and mainboard settings I should use for this system? I've read different numbers elsewhere but thought I should ask the memory manufacturers myself.

    Thank you!

  • #2
    Any G.Skill techs around to answer this? If I posted in the wrong place I apologize, just looking for some numbers.

    Comment


    • #3
      Settings should look roughly like this:

      AI Overclock Tuner - Manual
      DRAM Frequency - 1333

      DRAM Controller Configuration (submenu)
      DCT Unganged Mode - Enabled
      Power Down Enable - Disabled

      DRAM Timing/Driving Config. (submenu)
      tCL - 8
      tRCD - 8
      tRP - 8
      tRAS - 21

      Rest can be AUTO

      DRAM Voltage - 1.6V
      NB Voltage - 1.2V


      Thank you
      GSKILL SUPPORT

      Comment


      • #4
        Thank you very much! I shall try these out.

        Comment


        • #5
          If any problems, you'll want Command Rate at 2T (or 2N) and tRFC at 127.5


          Pls offer comments on support I provide, HERE, in order to help me do a better job here:

          Tman

          Comment


          • #6
            About changing the clock timings

            Hello, I had the same question with the person above but my bios is M4A78T-E BIOS 2503
            and my cpu is X3 720BE I changed all the settings as you have instructed but for the timings, i can't seem to change them manually they are set as auto, also the NB voltage's minimun is 1.3V what should i do?

            Comment


            • #7
              Should be a setting to allow manual settings..might check your manual...also are you running your X3 on the 3 cores or have you unlocked the 4th? Could you post your BIOS settings?


              Pls offer comments on support I provide, HERE, in order to help me do a better job here:

              Tman

              Comment


              • #8
                I couldn't get the cores to run at 4 cores since it got unstable using unleash mode. Also I am in manual settings but I can't edit the timings for each value. My settings are

                AI Overclock Tuner - Manual
                DRAM Frequency - 1333

                DRAM Controller Configuration (submenu)
                DCT Unganged Mode - Enabled
                Power Down Enable - Disabled

                Rest AUTO

                DRAM Voltage - 1.6V
                NB Voltage - 1.4V

                this is the part I can't seem to edit
                ---------------------------------------------------
                DRAM Timing/Driving Config. (submenu)
                tCL - 8
                tRCD - 8
                tRP - 8
                tRAS - 21
                -----------------------------------------------

                Comment


                • #9
                  Hi itwl bios 2503 will not let you change timmings this is a asus bug. You will have to downgrade to bios 2303 to be able to change those settings.

                  Comment

                  Working...
                  X