F3-10600cl7d-4gbpi

[Blankito]

Hi,

I have some problems with crashes.
They occur sporadically and at no fixed time.
Mostly the ATI driver quits an recovers.
I changed the grafic card same problem so i could not have to do with it
The timing of the memory was automatically set to 9-9-9-24.
I put them on 7-7-7-18 with 1.5V or 7-7-7-21 with 1.6
Nothing worked.





I started Prime98 and got this error:
FATAL ERROR: Rounding was 0.5, expected less than 0.4

Do I need to change the voltage?
What about the RAM VTT voltage?

My System:
AMD X4 955
Gigabyte GA-MA770T-UD3P
F3-10600CL7D-4GBPI
ATI 4890

[Tradesman]

What is your tRFC at? Should be about 127 (if in ns)

[Blankito]

What is your tRFC at? Should be about 127 (if in ns)

No it's at 110ns and i can only choose 90 / 110 / 160 / 300

[Tradesman]

Can you raise the tRC to maybe 40-42? Also might consider trying 8-8-8-24

[Blankito]

Can you raise the tRC to maybe 40-42? Also might consider trying 8-8-8-24

Yes i did, but Prime95 shows the same Error.

Memtest was running for 3hours with no errors!

I despair.

Could it be the mainboard?

[GSKILL TECH]

Try increasing HT Voltage to 1.40V. Keep us posted on the results.

Thank you
GSKILL SUPPORT

[Blankito]

Up to 1.4V? its on 1.2V
Should i really increase it to 1.4V?

[G.SKILL]

yes, please try to increase it to 1.4v
and don't worry, it's not too high
thanks


G.S

[Blankito]

yes, please try to increase it to 1.4v
and don't worry, it's not too high
thanks

I increased the NB/HT Voltage to 1.4 but prime95 shows the same Error: Rounding was 0.5 expected less than 0.4.

[Blankito]

Ok if found the error.
Its one of the memory sticks!

[G.SKILL]

if there is one stick defective, please contact with us for RMA
thanks


G.S