Need some help on this one as I'm stumped....
My setup is
200 BCLK x 20 for 4.0GHz running ram currently at 1600 7-7-7-20 and I get decent bandwidth BUT if I wanted 1600MHz ram I would have bought it.
If I set ram to 2000MHz 9-9-9-27 with my IMC at 1.39 and ram at 1.65 I can pass memtest all day long but once into Windows I error instantly on a prime run.
So as my frustration has got the best of me I need some clear thinking advice on how to get my ram to 2000MHz
AI Overclock Tuner:Manual
OC From CPU Level Up:Auto
OC From Memory Level up:Auto
CPU Ratio: 20
Intel Speed Step: Disabled
BCLK Frequency:200
PCIE Frequency:102
Dram Frequency: DDR3-1600MHz @ 7-7-7-20
QPI Frequency:6407MHz
CPU Clock Amplitude: Auto
PCH Clock Amplitude:Auto
CPU Clock Skew:Auto
PCH Clock Skew:Auto
Extreme OV: Disabled
Full Phase Control:Full Phase
Load Line Calibration:Enabled
CPU Voltage Mode:VID
CPU Volts: 1.35
CPU PLL:1.80
IMC:1.39
PCH:1.046
Dram:1.65
Dram Data Reff Voltage Chan A: Auto
Dram CTRL Reff Voltage Chan A: Auto
Dram Data Reff Voltage Chan B: Auto
Dram CTRL Reff Voltage Chan B: Auto
My setup is
200 BCLK x 20 for 4.0GHz running ram currently at 1600 7-7-7-20 and I get decent bandwidth BUT if I wanted 1600MHz ram I would have bought it.
If I set ram to 2000MHz 9-9-9-27 with my IMC at 1.39 and ram at 1.65 I can pass memtest all day long but once into Windows I error instantly on a prime run.
So as my frustration has got the best of me I need some clear thinking advice on how to get my ram to 2000MHz
AI Overclock Tuner:Manual
OC From CPU Level Up:Auto
OC From Memory Level up:Auto
CPU Ratio: 20
Intel Speed Step: Disabled
BCLK Frequency:200
PCIE Frequency:102
Dram Frequency: DDR3-1600MHz @ 7-7-7-20
QPI Frequency:6407MHz
CPU Clock Amplitude: Auto
PCH Clock Amplitude:Auto
CPU Clock Skew:Auto
PCH Clock Skew:Auto
Extreme OV: Disabled
Full Phase Control:Full Phase
Load Line Calibration:Enabled
CPU Voltage Mode:VID
CPU Volts: 1.35
CPU PLL:1.80
IMC:1.39
PCH:1.046
Dram:1.65
Dram Data Reff Voltage Chan A: Auto
Dram CTRL Reff Voltage Chan A: Auto
Dram Data Reff Voltage Chan B: Auto
Dram CTRL Reff Voltage Chan B: Auto
Comment