Hi everyone,
I'm new to this forum. I've found other threads on this forum and other websites with the same System Board mentioned, but nothing I've found so far works.
I'm trying to use the following components...
I purchased the above memory kit to upgrade my system from 4GB total memory to 16GB, as a way to put off upgrading the System Board & CPU for now as I can't afford that much of an upgrade. When I have the new DIMMs installed, the system cycles starting up with no display and no keyboard LED's on, then powers off for a few seconds and powers on again. I have tried the following hardware configurations...
I've tried clearing the CMOS, loading optimal settings & loading fail-safe settings, all with no change. I've tried adjusting the BIOS settings according to other threads & websites I've found, but they've not helped either. With Corsair XMS3 4GB Dual Channel DDR3 Memory Kit (CMX4GX3M2A1600C9) installed in slots 1 & 3, the system boots fine.
Any assistance you can give would be appreciated.
I'm new to this forum. I've found other threads on this forum and other websites with the same System Board mentioned, but nothing I've found so far works.
I'm trying to use the following components...
- Memory: RipjawsX F3-12800CL9Q-16GBXL (4x4GB DDR3)
- System Board: GA-EP45T-UD3LR, updated to BIOS revision F12E due to "Improve memory compatibility".
- CPU: Intel Core2 Duo Processor E7400
- Graphics: SAPPHIRE AMD Radeon HD 7970 3GB OC with Boost Edition
I purchased the above memory kit to upgrade my system from 4GB total memory to 16GB, as a way to put off upgrading the System Board & CPU for now as I can't afford that much of an upgrade. When I have the new DIMMs installed, the system cycles starting up with no display and no keyboard LED's on, then powers off for a few seconds and powers on again. I have tried the following hardware configurations...
- All four DIMMs installed, no change
- Two DIMMs in slots 1 & 3 or 2 & 4, no change
- Only one of the four DIMMs in any slot, no change
I've tried clearing the CMOS, loading optimal settings & loading fail-safe settings, all with no change. I've tried adjusting the BIOS settings according to other threads & websites I've found, but they've not helped either. With Corsair XMS3 4GB Dual Channel DDR3 Memory Kit (CMX4GX3M2A1600C9) installed in slots 1 & 3, the system boots fine.
Any assistance you can give would be appreciated.
Comment