Model F3-14900CL10Q-32GBZL and GIGABYTE GA-990FXA-UD3

[thenextvision]

It's been years since I've built my own computer so I'm kind of lost. I'm just trying to get the ram up to 1600. I know it won't run at 1866. What setting do I need in order to achieve 1600?

Model F3-14900CL10Q-32GBZL
GIGABYTE GA-990FXA-UD3
AMD FX-8350

[Tradesman]

Might take a look here, and see how it goes, the member includes a lot more info than I would initially provide. Slightly different mobo, but same GB base

http://www.gskill.us/forum/showthread.php?t=12360

[thenextvision]

Thank you. I'll give it a try.

[Tradesman]

Let me know how it goes!

[thenextvision]

Didn't work for me.

[Tradesman]

What did it do, not do? Did it load and then Blue screen, not start at all or what?

[thenextvision]

I didn't see dram eocp or DCT setting in my bios. It won't boot then the board resets to the default bios settings.

[Tradesman]

I'll pull down a manual and take a look, back later this PM

[GSKILL TECH]

Enable DOCP/EOCP, raise CPU-NB Voltage +0.1V and see how that works.

Thank you
GSKILL TECH

[thenextvision]

I have yet to find any DOCP/EOCP settings.

[thenextvision]

I've tried using xmp also.

[Tradesman]

Might want to try 1600, 10-11-10-31, 2N, DRAM 1.55, CPU/NB 1.3, and tRFC about 270

[thenextvision]

Might want to try 1600, 10-11-10-31, 2N, DRAM 1.55, CPU/NB 1.3, and tRFC about 270

I see two tRFC settings. One is tRFC0 and the other is tRFC1

[Tradesman]

Change both

[thenextvision]

No luck. Most likely I'm missing something. I can though get it up to 1866 on two sticks.