That's pretty much as good as it gets. You can try the suggested values as shown next to each option, but I would simply leave as is.
Thank you
GSKILL TECH
Thank you
GSKILL TECH
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...[AUTO] CPU Clock Ratio ...........9X Fine CPU Clock Ratio.......0.0 CPU Frequency .............3.00 GHz (333*9) Clock Chip Control >>>Standard Clock Control CPU Host Clock Control.......[Disabled] CPU Host Frequency (Mhz) ....333 PCI Express Frequency (Mhz)..100>>AUTO C.I.A.2 .....................[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive..................[800mV] PCI Express Clock Drive..........[900 mV] CPU Clock Skew (ps)..............0ps MCH Clock Skew (ps)..............0ps DRAM Performance Control Performance Enhance..............[STANDARD] Extreme Memory Profile (X.M.P.)..[Enabled] (G)MCH Frequency Latch...........[Manual] System Memory Multiplier ........[2.40B] Memory Frequency (Mhz) ..........800 DRAM Timing Selectable ..........[Manual] Standard Timing Control CAS Latency Time...5 [5] tRCD ..............7 [5] tRP'...............7 [5] tRAS...............20 [15] Advanced Timing Control tRRD...............4 [AUTO] tWTR...............4 [AUTO] tWR................8 [AUTO] tRFC...............68 [80] tRTP...............4 [AUTO] Command Rate (CMD).0 [2] Driving Strength Profiles Driving Strength ...... >>Channel A Static tRead Value........7 tRD Phase0 Adjustment.....0 [AUTO] tRD Phase1 Adjustment.....0 [AUTO] tRD Phase2 Adjustment ....0 [AUTO] tRD Phase3 Adjustment.....0 [AUTO] Trd2rd(Different Rank)....6 [AUTO] Twr2wr(Different Rank)....6 [AUTO] Twr2rd(Different Rank)....5 [AUTO] Trd2wr(Same/Diff Rank)....8 [AUTO] Dimm1 Clock Skew Control....[AUTO] Dimm2 Clock Skew Control....[AUTO] DDR Write Training..........[AUTO] Driving Strength Profile......[AUTO] (maybe i need to set this to 1066?) Data Driving Pull-up Level....[AUTO] Cmd Driving Pull-up Level.....[AUTO] Ctrl Driving Pull-up Level....[AUTO] Clk Driving Pull-up Level.....[AUTO] Data Driving Pull-Down Level..[AUTO] Cmd Driving Pull-Down Level...[AUTO] Ctrl Driving Pull-Down Level..[AUTO] Clk Driving Pull-Down Level...[AUTO] >>Channel B Static tRead Value..........7 tRD Phase0 Adjustment.......0 [AUTO] tRD Phase1 Adjustment.......0 [AUTO] tRD Phase2 Adjustment ......0 [AUTO] tRD Phase3 Adjustment.......0 [AUTO] Trd2rd(Different Rank)......6 [AUTO] Twr2wr(Different Rank)......6 [AUTO] Twr2rd(Different Rank)......5 [AUTO] Trd2wr(Same/Diff Rank)......8 [AUTO] Dimm1 Clock Skew Control......[AUTO] Dimm2 Clock Skew Control......[AUTO] DDR Write Training............[AUTO] Driving Strength Profile......[AUTO] (same as prev comment) Data Driving Pull-up Level....[AUTO] Cmd Driving Pull-up Level.....[AUTO] Ctrl Driving Pull-up Level....[AUTO] Clk Driving Pull-up Level.....[AUTO] Data Driving Pull-Down Level..[AUTO] Cmd Driving Pull-Down Level...[AUTO] Ctrl Driving Pull-Down Level..[AUTO] Clk Driving Pull-Down Level...[AUTO] Motherboard Voltage Control Voltage Type >>> CPU Load-Line Calibration [DISABLED] CPU Vcore...............1.23750v..[AUTO] CPU Termination?........1.200v....[AUTO] CPU PLL????.............1.500v....[AUTO] CPU Referen............:0.760v....[AUTO] >>>MCH/ICH MCH Core.........1.100v...[1.400v] MCH Reference....0.760v...[AUTO] MCH/DRAM Ref.....0.900v...[1.000v] ICH I/O..........1.500v...[AUTO] ICH Core.........1.100v...[AUTO] >>> DRAM DRAM Voltage ........1.800v...[2.100v] DRAM Termination.....0.900v...[AUTO] Channel A Reference..0.900v...[AUTO] Channel B Reference..0.900v...[AUTO]
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................: 8 Fine CPU Clock Ratio.....................: .0 CPU Frequency ...........................: 3.92GHz Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 490Mhz PCI Express Frequency (Mhz) .........: 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: 900 PCI Express Clock Drive.................: 900 CPU Clock Skew (ps)....................: MCH Clock Skew (ps)...................:50 DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: Auto System Memory Multiplier ..............: 2.00D Memory Frequency (Mhz) ..............: 980 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................5 tRCD .........................................5 tRP'...........................................4 tRAS..........................................12 Advanced Timing Control tRRD...........................................1 tWTR..........................................2 tWR............................................2 tRFC...........................................42 tRTP...........................................1 Command Rate (CMD) ............................1 Driving Strength Profiles Driving Strength ............................OC-1200 Channel A Static tRead Value.........................:9 tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:9 tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control Load Line Calibration.................: Enabled CPU Vcore….……….........................: 1.38125v (1.36v in CPU-Z) CPU Termination…..... 1.200V*.......: 1.34v CPU PLL…………………....1.500V*.......: 1.57v CPU Referen.…………....0.755V*.......: 0.76v BIOS @ 1.2vtt MCH/ICH MCH Core…………….....1.100V...........: 1.34v MCH Reference….…….0.760V...........; 0.800v BIOS @ 1.2vtt MCH/DRAM Ref.…......0.900V...........: 0.855v ICH I/O……………….....1.500V............: 1.5v ICH Core…………...……1.100V............:1.1v DRAM DRAM Voltage ……....1.800V............: 1.9v DRAM Termination .…0.900V............: 0.855v Channel A Reference 0.900V............: 0.855v Channel B Reference 0.900V............: 0855v Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Enabled] C2/C2E State Support....................: [Enabled] x C4/C4E State Support..................: [Enabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Enabled] Virtualization Technology................: [Enabled] Enabled if you use Vmware/Virtual PC Integrated Peripherals Legacy USB Storage Detect ..............[Enabled] *Note* Must be enabled to flash from USB
Comment