I've just installed the P5Q Pro, with my E6750 and have managed to get the cpu to 3.6 (450 x 8) with 4G G.Skill PC2-8000C5 at 900 5-5-5-15 1:1 and 4 hours Prime stable.
The problem is that if I try to get the ram to over 1000, it fails Prime in a few seconds.
Here's they are and any advice greatly appreciated.
8 x 450 - 3.6
FSB Strap - 333 (tried 400, failed to boot)
DDR2 1081 (gets into Vista, but fails Prime within seconds)
5-5-5-15
CPU - 1.4125v
Dram - 2.1v
NB - 1.3v
SB - 1.2v
I have the lastest bios.
The problem is that if I try to get the ram to over 1000, it fails Prime in a few seconds.
Here's they are and any advice greatly appreciated.
8 x 450 - 3.6
FSB Strap - 333 (tried 400, failed to boot)
DDR2 1081 (gets into Vista, but fails Prime within seconds)
5-5-5-15
CPU - 1.4125v
Dram - 2.1v
NB - 1.3v
SB - 1.2v
I have the lastest bios.
Comment