If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Help to config G.Skill. PI series 8GB (F2-8800CL5-2GBPI) with ASUS P5Q-E
It is trial and error testing to see what is most stable, or if the system is capable.
What voltage do I go up? DRAM voltage and NB voltage at the same time or one of them only? Where do I start? I know this is trial and error, but give me a pattern to follow or a reference. That's what I'm asking from the beginning. At 1066 I have managed to make it stable, now only the stable is 1100.
You should have a base value at DDR2-1066, then scale up from there to see adding more can improve stability. Try one Voltage at a time, then potentially both depending on results. Should not require much more than +0.1V for a jump from 1066 to 1100.
Comment