Announcement

Collapse
No announcement yet.

F2-8500CL6D: DQS Training Failed...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2-8500CL6D: DQS Training Failed...

    model of the motherboard: FOXCONNA7DA Serries
    model of the memory:F2-8500CL6D-4GBNQ DDR2-1066 PC28500 2048MB (this is two sticks of RAM)
    model of the CPU:AMD Phenom II

    what is the problem:

    I just upgraded my computer and bought the 2 pieces of DDR2-1066 PC28500 2048MB x2 RAM.

    When I start the computer I get "DQS training failed on previous boot, Revert to slower DRAM speed
    Press F1 to resume."

    If I reboot I don't get the message but if I turn off the computer for a while and turn it on, I get the same error message. I pulled out one stick and got the same message. I change to the other stick and get the same error. Can this be fixed or is this bad RAM? Do I require a RMA#?

  • #2
    for running DDR2 1066 on AMD platform, you'll need to add the northbridge/HT voltage to 1.4-1.5v
    and please make sure the timing is set to 6-6-6-18 2T@2.0v
    thanks


    G.S

    Comment

    Working...
    X