Tweet
[ONLY for Falcon II SSD]Firmware 1916 Released
Dear all~
We apologized for the long time you've waited for the new firmware 1916.
There was some compatible problem with firmware upgrade application, so it took us some time to solve this issue.
That's why we release it late.
Now here it is.
The way of updating firmware is the same as Falcon below:
YouTube Video: http://www.youtube.com/watch?v=fl9ppwW3urI
Notice details in description.
After downloading this firmware updating application, please extract it first
Install Falcon SSD, plug the jumper and turn on your machine.
Right click "Upgrade_AP.exe," and choose "Run as administrator"
Once the application is loaded, select your G.Skill SSD model (take Falcon 128GB for example)
And press "Upgrade F/W" bottom to upgrade new firmware
Remember to change the jumper after upgrading firmware
Download G.Skill Falcon II Series SSD 1916 Firmware Upgrade AP
*Please remember to back up your data in SSD before upgrading new firmware.
After upgrading firmware, the partition will be deleted.
We apologized for the long time you've waited for the new firmware 1916.
There was some compatible problem with firmware upgrade application, so it took us some time to solve this issue.
That's why we release it late.
Now here it is.
Change Logs:
Bug Fix: Early performance drop issue in quite clean state. This problem is fixed with changing weak dynamic wear leveling parameter
Feature Add: Initial check in for Enhanced Security Erase feature. It is disabled for normal firmware release and needs enhancement.
Bug Fix: AMI BIOS identified 8GB drive as 0MB size. To work around this issue, LBA48bit support is disabled for 8GB or smaller drive.
Bug Fix: Early performance drop issue in quite clean state. This problem is fixed with changing weak dynamic wear leveling parameter
Feature Add: Initial check in for Enhanced Security Erase feature. It is disabled for normal firmware release and needs enhancement.
Bug Fix: AMI BIOS identified 8GB drive as 0MB size. To work around this issue, LBA48bit support is disabled for 8GB or smaller drive.
The way of updating firmware is the same as Falcon below:
YouTube Video: http://www.youtube.com/watch?v=fl9ppwW3urI
Notice details in description.
After downloading this firmware updating application, please extract it first
Install Falcon SSD, plug the jumper and turn on your machine.
Right click "Upgrade_AP.exe," and choose "Run as administrator"
Once the application is loaded, select your G.Skill SSD model (take Falcon 128GB for example)
And press "Upgrade F/W" bottom to upgrade new firmware
Remember to change the jumper after upgrading firmware
*Please remember to back up your data in SSD before upgrading new firmware.
After upgrading firmware, the partition will be deleted.