If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Just wondering what the BIOS settings are for this motherboard and RAM. I haven't been able to find anything substantial and I want to make sure everything is configured correctly.
Make the following changes and everything should be working properly.
Advanced CPU Features:
CPU Clock Ratio ................................ [21x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
C3/C6/C7 State Support ................... [Auto]
CPU Enhanced Halt (C1E) ................... [Auto]
C3/C6/C7 State Support .................... [Auto]
CPU Thermal Monitor ......................... [Auto]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Disabled]
Bi-Directional PROCHOT ..................... [Auto]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 133
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
Advanced DRAM Features:
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [10.0]
Performance Enhance ...................... [Standard]
DRAM Timing Selectable (SPD) .......... [Expert]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... 8
tRCD ....................................... 8
tRP ......................................... 8
tRAS ....................................... 24
##Channel A Advanced Timing Control##
Command Rate (CMD) ................ 2
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Disabled]
CPU Vcore ............................... 1.275 [1.275]
QPI/VTT Voltage 1.150v ............ 1.100V [1.100V]
CPU PLL 1.800v ....................... 1.800v [1.800V]
DRAM
DRAM Voltage 1.500v .............. 1.500V
If you want a safe CPU overclock, use these settings:
Advanced CPU Features:
CPU Clock Ratio ................................ [20x] 3.3GHz
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
C3/C6/C7 State Support ................... [Auto]
CPU Enhanced Halt (C1E) ................... [Auto]
C3/C6/C7 State Support .................... [Auto]
CPU Thermal Monitor ......................... [Auto]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Disabled]
Bi-Directional PROCHOT ..................... [Auto]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 167
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
Advanced DRAM Features:
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [8.0]
Performance Enhance ...................... [Standard]
DRAM Timing Selectable (SPD) .......... [Expert]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... 8
tRCD ....................................... 8
tRP ......................................... 8
tRAS ....................................... 24
##Channel A Advanced Timing Control##
Command Rate (CMD) ................ 2
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Disabled]
CPU Vcore ............................... 1.275 [1.300]
QPI/VTT Voltage 1.150v ............ 1.100V [1.200V]
CPU PLL 1.800v ....................... 1.800v [1.900V]
Comment